Our casting team boasts over 40 years experience in producing superior casting results with a 95% consistent success rate with all of our castings (most which come out porosity free). The casting team has perfected an extremely timed and delicate process to ensure each and every casting you get from us is consistent.
We only use premium quality master alloys and pure granule gold, silver and platinum to ensure each and every casting is consistent.
The types of precious metals we cast on a day to day basis are:
Here at Tok Brothers, we are able to cast your own resins and waxes. In order for us to be able to cast your own resin, it must be properly cleaned by you, cured and delivered to us in an air tight container. If you have a wax that you would like to be casted, you must ensure there is no oil or any other coating on the wax.
Tok Brothers cannot guarantee or warrant that your resin or wax will be porosity free after casting nor will we be responsible for a miscast.
At Tok Brothers, we are able to cast with your supplied gold & silver as we understand your precious metal may have a strong sentimental value to you or you simply have a stock pile of gold and silver you wish to re-use. We offer this at an additional fee as a separate dedicated flask will need to be made up so we can return the left over precious metal back to you (pending there is enough metal for casting).
We cannot warrant or guarantee that your precious metal will successfully cast.
At Tok Brothers so long as we print the resin and cast with our metals we offer a lifetime guarantee on the raw castings to be free from defects such as porosity and brittleness.
We understand that cleaning raw castings must be done with great care otherwise your casting can be damaged. Because of this we offer 3 levels of gentle cleaning:
Our cut off time for casting is 1pm Monday to Thursday only.